Skip to content
Shop by Application

Shop by Application

Filters

  • $20.20 - $270.94
    $20.20 - $270.94
    $20.20 - $270.94
    $20.20

    Phillips Driver Bit (Pack of 10)

    (Pack of 10) Made in USA. High quality driver bit

    $20.20 - $270.94
    $20.20 - $270.94
    $20.20 - $270.94
    $20.20
  • Replaceable Tungsten Knives - Single Sided with Sharpened Ends - tungstenandtool
    $121.49 - $217.37
    $121.49 - $217.37
    $121.49 - $217.37
    $121.49

    Replaceable Tungsten Knives - Single Sided with Sharpened Ends

    Replaceable Tungsten Knives - Single Sided with Sharpened Ends

    $121.49 - $217.37
    $121.49 - $217.37
    $121.49 - $217.37
    $121.49
  • Tungsten Tipped Rebating Router Bit - 2 Flute - 1/2" Shank - tungstenandtool
    $118.68 - $178.03
    $118.68 - $178.03
    $118.68 - $178.03
    $118.68

    Tungsten Tipped Rebating Router Bit - 2 Flute - 1/2" Shank

    Tungsten Tipped Rebating Hand Held Router Bit - 2 Flute - 1/2" Shank For creating fast and accurate rebates. Has ball bearing guide for mar-free f...

    View full details
    $118.68 - $178.03
    $118.68 - $178.03
    $118.68 - $178.03
    $118.68
  • $69.61 - $97.49
    $69.61 - $97.49
    $69.61 - $97.49
    $69.61

    Tungsten Tipped Round Nose Veining Router Bit - 1/4" Shank

    Tungsten Tipped Round Nose (Ball Nose) Veining Router Bit - 1/4" Shank  For grooving and scoring panel designs in wood surfaces

    $69.61 - $97.49
    $69.61 - $97.49
    $69.61 - $97.49
    $69.61
  • Tungsten Tipped Thru Boring Bits 77mm long - tungstenandtool
    $95.27 - $107.17
    $95.27 - $107.17
    $95.27 - $107.17
    $95.27

    Tungsten Tipped Thru Boring Bits 77mm long

    TCT Through Holes - Boring Bits Use for drilling through holes in solid wood, wood composites, plastic and laminated materials. TECHNICAL DETAILS: ...

    View full details
    $95.27 - $107.17
    $95.27 - $107.17
    $95.27 - $107.17
    $95.27
  • Tungsten Tipped Thru Boring Bits 58mm Long - tungstenandtool
    $79.39 - $107.17
    $79.39 - $107.17
    $79.39 - $107.17
    $79.39

    Tungsten Tipped Thru Boring Bits 58mm Long

    Tungsten Tipped Thru Boring Bits 58mm Long Use for drilling through holes in solid wood, wood composites, plastic and laminated materials. TECHNICA...

    View full details
    $79.39 - $107.17
    $79.39 - $107.17
    $79.39 - $107.17
    $79.39
  • Tungsten Tipped Dowell Boring Bits 77mm Long - tungstenandtool
    $75.42 - $99.23
    $75.42 - $99.23
    $75.42 - $99.23
    $75.42

    Tungsten Tipped Dowell Boring Bits 77mm Long

    Tungsten Tipped Dowell Boring Bits 77mm Long Tungsten Tipped Dowell Boring Bits 77mm Long For drilling clean blind holes. Suitable for Solid Wood ...

    View full details
    $75.42 - $99.23
    $75.42 - $99.23
    $75.42 - $99.23
    $75.42
  • Solid Tungsten V Flute Straight Cutter - 2 Flute - Imperial Range - tungstenandtool
    $105.90 - $563.82
    $105.90 - $563.82
    $105.90 - $563.82
    $105.90

    Solid Tungsten V Flute Straight Cutter - 2 Flute - Imperial Range

    Solid Tungsten V Flute Straight Cutter - 2 Flute - Imperial Range for CNC Routers Designed specifically to rout harder more rigid plastics. Suitab...

    View full details
    $105.90 - $563.82
    $105.90 - $563.82
    $105.90 - $563.82
    $105.90
  • $100.43 - $100.43
    $100.43
    $100.43 - $100.43
    $100.43

    TCT ACM Folding Router Bits with 1/4" Shank

      The TCT ACM Folding Router Bit is expertly crafted to create precise grooves in ACM material, allowing for accurate and flawless folds.  

    $100.43 - $100.43
    $100.43
    $100.43 - $100.43
    $100.43
  • Collet Sleeves - tungstenandtool
    $36.62 - $41.08
    $36.62 - $41.08
    $36.62 - $41.08
    $36.62

    Collet Sleeves / Drill Adaptor

    Collet Sleeves Also known as twist drill adaptors these are the sleeves used to take smaller size drills in CNC collets.

    $36.62 - $41.08
    $36.62 - $41.08
    $36.62 - $41.08
    $36.62
  • Ultra Precision Collets ER40 - tungstenandtool NZ
    $159.77 - $159.77
    $159.77
    $159.77 - $159.77
    $159.77

    Ultra Precision Collets ER40

    Experience superior accuracy and gripping power with Ultra Precision Collets ER40. These collets offer twice the accuracy of standard precision col...

    View full details
    $159.77 - $159.77
    $159.77
    $159.77 - $159.77
    $159.77
  • $119.34 - $119.34
    $119.34
    $119.34 - $119.34
    $119.34

    Solid Carbide Knife Blade - Drag/Oscillating Esko Kongsberg

    Suitable for machine manufacturer: Original Knife no.Esko Kongsberg: T16, BLD-SR6224, G42438135 Recommended materials: Carpet Materials with rubber...

    View full details
    $119.34 - $119.34
    $119.34
    $119.34 - $119.34
    $119.34
  • Fine Cut Sawblades for Heavier Aluminum - tungstenandtool
    $397.14 - $1,349.59
    $397.14 - $1,349.59
    $397.14 - $1,349.59
    $397.14

    Fine Cut Sawblades for Heavier Aluminium (3mm and Greater)

    Premium low noise High Performance Industrial Fine Cut Sawblades for Heavier section Aluminum Flat - Triple Chip tooth with 6 degree negative cutt...

    View full details
    $397.14 - $1,349.59
    $397.14 - $1,349.59
    $397.14 - $1,349.59
    $397.14
  • $28.12 - $174.29
    $28.12 - $174.29
    $28.12 - $174.29
    $28.12

    Phillips Ribbed Insert Bit (Pack of 10)

    Phillips Ribbed Insert Bit.

    $28.12 - $174.29
    $28.12 - $174.29
    $28.12 - $174.29
    $28.12
  • Holesaw Premium A1 Arbors - Hex Shank - tungstenandtool
    $39.38 - $68.23
    $39.38 - $68.23
    $39.38 - $68.23
    $39.38

    Holesaw Premium A1 Arbors - Hex Shank

    Hex Shank Holesaw Arbors 33-4100, to suit holesaws up to 30mm diameter 33-4102, to suit holesaws above 30mm diameter

    $39.38 - $68.23
    $39.38 - $68.23
    $39.38 - $68.23
    $39.38
  • Tungsten Tipped Laminate Trimmer - tungstenandtool
    $67.82 - $72.55
    $67.82 - $72.55
    $67.82 - $72.55
    $67.82

    Tungsten Tipped Laminate Trimmer

    Tungsten Tipped Laminate Trimmer This 22º bevel bit is for small hand held trimmers fitted with a roller guide. A flat is on the shank for the clam...

    View full details
    $67.82 - $72.55
    $67.82 - $72.55
    $67.82 - $72.55
    $67.82
  • Tungsten Tipped M8 Threaded Dowell Boring Bits 77mm Long - tungstenandtool
    $162.74 - $202.44
    $162.74 - $202.44
    $162.74 - $202.44
    $162.74

    Tungsten Tipped M8 Threaded Dowell Boring Bits 77mm Long

    Tungsten Tipped M8 Threaded Dowell Boring Bits 77mm Long For drilling accurate and clean blind holes. Suitable for Solid Wood Wood Composites and ...

    View full details
    $162.74 - $202.44
    $162.74 - $202.44
    $162.74 - $202.44
    $162.74
  • Solid Tungsten V Flute Straight Cutter - 2 Flute - Metric Range - tungstenandtool
    $169.36 - $451.91
    $169.36 - $451.91
    $169.36 - $451.91
    $169.36

    Solid Tungsten V Flute Straight Cutter - 2 Flute - Metric Range

    Solid Tungsten V Flute Straight Cutter - 2 Flute - Metric Range for CNC Routers Designed specifically to rout harder more rigid plastics. Suitable ...

    View full details
    $169.36 - $451.91
    $169.36 - $451.91
    $169.36 - $451.91
    $169.36
  • PreKote Cleaner - tungstenandtool
    $79.39 - $1,376.26
    $79.39 - $1,376.26
    $79.39 - $1,376.26
    $79.39

    PreKote Cleaner - Surface Pre-treatment

    PreKote Cleaner Made in USA Primarily made for Boeing and the aeronautical manufacturing industry for cleaning aircraft fuselages, wings etc prior...

    View full details
    $79.39 - $1,376.26
    $79.39 - $1,376.26
    $79.39 - $1,376.26
    $79.39
  • Solid Tungsten Downcut Cutter for Phenolic - 3 Flute - tungstenandtool
    $412.40 - $579.54
    $412.40 - $579.54
    $412.40 - $579.54
    $412.40

    Solid Tungsten Downcut Cutter for Phenolic - 3 Flute

    Solid Tungsten Downcut Cutter - 3 Flute for CNC routers. Phenolic materials, an organic resin based material, are used invarious industrial applica...

    View full details
    $412.40 - $579.54
    $412.40 - $579.54
    $412.40 - $579.54
    $412.40
  • Metal Cutting Bandsaw Blade - tungstenandtool NZ
    $70.01 - $75.27
    $70.01
    $70.01 - $75.27
    $70.01

    Industrial Bandsaw Blades for Metal Cutting

    Industrial Bandsaw Blades for Metal Cutting

    $70.01 - $75.27
    $70.01
    $70.01 - $75.27
    $70.01
  • Tungsten Tipped Rebating Router Bit - 2 Flute - 1/4" Shank - tungstenandtool
    $101.73 - $118.68
    $101.73 - $118.68
    $101.73 - $118.68
    $101.73

    Tungsten Tipped Rebating Router Bit - 2 Flute - 1/4" Shank

    Tungsten Tipped Rebating Hand Held Router Bit - 2 Flute - 1/4" Shank For creating fast and accurate rebates. Has ball bearing guide for mar-free f...

    View full details
    $101.73 - $118.68
    $101.73 - $118.68
    $101.73 - $118.68
    $101.73
  • $72.06 - $105.15
    $72.06 - $105.15
    $72.06 - $105.15
    $72.06

    Tungsten Tipped Core Box Router Bit - 2 Flute - 1/4" Shank

    Tungsten Tipped Round Nose Router Bit - 2 Flute - 1/4" Shank For creating rounded grooves. Personalize your doors, drawer fronts, panels or any s...

    View full details
    $72.06 - $105.15
    $72.06 - $105.15
    $72.06 - $105.15
    $72.06
  • Tungsten Tipped "V" Veining Router Bit - Single Flute - 1/4" Shank - tungstenandtool
    $72.06 - $72.06
    $72.06
    $72.06 - $72.06
    $72.06

    Tungsten Tipped "V" Veining Router Bit - Single Flute - 1/4" Shank

    Tungsten Tipped "V" Veining Router Bit - Single Flute - 1/4" Shank For 45° decorative grooving and scoring. Can be used in multiple materials

    $72.06 - $72.06
    $72.06
    $72.06 - $72.06
    $72.06